Track segments for a 1:35 scale model of the French heavy tank Char B1 or similar vehicle, printed in grey resin. The different sizes refer to the width of the track shoe, with 16mm being the original used on the B1. All other dimensions are the same on sizes 14mm and larger, so it is possible to make a track with multiple shoe sizes, as was done on some WWI-era tanks. 12mm and smaller sizes are actually scaled-down versions of the 14mm model, with 12mm being approximately 1:41 and 10mm being approximately 1:52. The “historical” appearance has a straight track shoe with notches, while the “stylised” appearance is bent down at the tips without notches. Other modifications to this design are available upon request, such as the addition or removal of rivets.
For ease of ordering, and also to reduce the price per unit, there are various package quantities that you can order, the maximum of which is based on how many can fit on my printer’s build platform. For example, I can print 104 14-mm segments at a time, but only 60 26-mm segments, therefore, the maximum package size for 10mm through 16mm is 100, but only 50 for 18mm and 26mm.